Spray Nozzles

home / equipment / accessories / spray-nozzles

Filter Further

  • PSI
    • 500
  • GPM
  • HP
  • Pump
  • Pump Speed
  • Drive
  • Air Mover Size
  • Air Mover Type
  • BAR
  • BTU
  • Cabinet
  • Capacity
  • CC/ Volts
  • CFM
  • Components Filter
  • Engine
  • Engine Power
  • Fuel Type
  • Heater Accessories
  • Heater Fuel
  • Heater Module
  • Hose Colour
  • Hose Diameter
  • Hose Length
  • Hose Reel Material
  • Hose Reel Retraction
  • HYPACK
  • KW
  • L/Min
  • Lance Length
  • Lance Material
  • Max. Pressure
    • 4000 PSI
    • 500 PSI
    • 3000 PSI
    • 3000 PSI
    • 3500 PSI
    • 3050 PSI
    • 10800 PSI
    • 3000 PSI
    • 2900 PSI
    • 3600 PSI
    • 3000 PSI
    • 14500 PSI
    • 7250 PSI
    • 7250 PSI
    • 3250 PSI
    • 5500 PSI
    • 3500 PSI
    • 4200 PSI
    • 2000 PSI
    • 2000 PSI
    • 5000 PSI
    • 5000 PSI
    • 5000 PSI
    • 3650 PSI
    • 5100 PSI
    • 2300 PSI
    • 3625 PSI
    • 7250 PSI
    • 6000 PSI
    • 5000 PSI
  • Max. Temp
  • Mobility
  • Pipe Size
  • Pressure
  • Recirculating Hood
  • Safety Shut Off
  • Size
  • Spray Gun Type
  • Starting
  • Steam
  • Time Delay Shutdown
  • Trailer
  • Type
    • High Pressure Nozzles
    • High Pressure Nozzles
    • High Pressure Nozzles
    • High Pressure Nozzles
    • High Pressure Nozzles
    • Sandblasting Nozzles
    • Rotating Nozzles
    • High Pressure Nozzles
    • Rotating Nozzles
    • Rotating Nozzles
    • Nozzle Holders
    • Nozzle Holders
    • Nozzle Holders
    • Nozzle Holders
    • High Pressure Nozzles
    • High Pressure Nozzles
    • Sandblasting Nozzles
    • Sandblasting Nozzles
    • Sandblasting Nozzles
    • Drain Cleaning Nozzles
    • Drain Cleaning Nozzles
    • Tank Cleaning Nozzles
    • Tank Cleaning Nozzles
    • High Pressure Nozzles
    • High Pressure Nozzles
    • High Pressure Nozzles
    • High Pressure Nozzles
    • High Pressure Nozzles
    • Rotating Nozzles
    • Rotating Nozzles
    • Rotating Nozzles
    • Rotating Nozzles
    • Rotating Nozzles
    • Rotating Nozzles
    • Rotating Nozzles
    • Tank Cleaning Nozzles
    • Tank Cleaning Nozzles
    • Tank Cleaning Nozzles
    • Tank Cleaning Nozzles
    • Tank Cleaning Nozzles
    • Drain Cleaning Nozzles
    • Drain Cleaning Nozzles
    • Drain Cleaning Nozzles
    • Drain Cleaning Nozzles
    • Drain Cleaning Nozzles
    • Drain Cleaning Nozzles
    • Drain Cleaning Nozzles
    • Drain Cleaning Nozzles
    • Drain Cleaning Nozzles
    • Rotating Nozzles
  • Water Type
Interpump Multireg 99 High-Low Nozzle
Interpump Multireg 99 High-Low Nozzle

Interpump Multireg 99 High-Low Nozzle

The Interpump Multireg 99 High-Low Nozzle pressure is selected by push-pull action. It features an adjustable spray pattern of 0° (solid stream) to 80° (flat spray), Replacement orifices are available for replacement or flow rate adjustment.

The IInterpump Multireg 99 High-Low Nozzle features :

  • 3 000 psi Max. Pressure
  • 5.5 gpm Max. Flow
  • 140° F Max. Temperature
  • 1/4" BSP-F Inlet
  • High-Low Adjustable
  • 8 oz. Weight
Product No.  Size  Colour
 MREG991.30  03  Orange
 MREG991.35  035  Dark Blue
 MREG991.40  04  Red
 MREG991.45  045  Yellow
 MREG991.50  05  Light Blue
 MREG991.55  055  White
 MREG991.60  06  Black
 MREG991.65  065  Purple
 MREG991.70  07  Brown
 MREG991.75  075  Neutral
 MREG991.80  08  Green

 



More Details
PA High Pressure Nozzles 14 500 psi
PA High Pressure Nozzles 14 500 psi

Features:

  • 14,500 psi Max. Pressure
  • 1/8" or 1/4" MPT
  • 0 degree spray angle
  • Stainless steel body
  • Nozzle Insert : Sapphire
Product No.  Description
 PW1/4M0002SPH  1/4 npt, 00 Degree Spray Angle – 02 Orifice
 PW1/4M00031SPH  1/4 npt, 00 Degree Spray Angle – 031 Orifice
 PW1/4M00042SPH  1/4 npt, 00 Degree Spray Angle – 042 Orifice
 PW1/4M00048SPH  1/4 npt, 00 Degree Spray Angle – 048 Orifice
 PW1/4M00062SPH  1/4 npt, 00 Degree Spray Angle – 062 Orifice
 PW1/4M00068SPH  1/4 npt, 00 Degree Spray Angle – 068 Orifice
 PW1/8M0002SPH  1/8 npt, 00 Degree Spray Angle – 02 Orifice
 PW1/8M0003SPH  1/8 npt, 00 Degree Spray Angle – 03 Orifice
 PW1/8M0004SPH  1/8 npt, 00 Degree Spray Angle – 04 Orifice
 PW1/8M00054SPH  1/8 npt, 00 Degree Spray Angle – 054  Orifice
 PW1/8M0006SPH  1/8 npt, 00 Degree Spray Angle – 06  Orifice

 



More Details
PA 7250 PSI High Pressure Nozzles
PA 7250 PSI High Pressure Nozzles

Features:

  • 7,250 psi Max. Pressure
  • 1/8" or 1/4" mpt
  • 40 degree spray angle
  • Stainless Steel Body
  • Nozzle Insert : Tungsten Carbide

 

Product No.  Description
 PW1/M4002TC  1/4 npt, 40 Degree Spray Angle – 02 Orifice
 PW1/4M4003TC  1/4 npt, 40 Degree Spray Angle – 03 Orifice
 PW1/4M40038TC  1/4 npt, 40 Degree Spray Angle – 038 Orifice
 PW1/4M40049TC  1/4 npt, 40 Degree Spray Angle – 049 Orifice
 PW1/4M40055TC  1/4 npt, 40 Degree Spray Angle – 055 Orifice
 PW1/4M002TC  1/4 npt4, 40 Degree Spray Angle – 02 Orifice
 PW1/8M0003TC  1/8 npt, 40 Degree Spray Angle – 03 Orifice
 PW1/8M00038TC  1/8 npt, 40 Degree Spray Angle – 038 Orifice
 PW1/8M00049TC  1/8 npt, 40 Degree Spray Angle – 049 Orifice
 PW1/8M00055TC  1/8 npt, 40 Degree Spray Angle – 055 Orifice

 

More Details
High Pressure Drain Cleaning Nozzle Kits
High Pressure Drain Cleaning Nozzle Kits

High Pressure Drain Cleaning Nozzle Kits

High Pressure Drain Cleaning Nozzle Kits feature:

  • Quality nozzles for use in sewer and drain cleaning applications
  • Heat treated 416SS construction
  • 10 000 psi Rated Pressure
  • 1/4" NPT connection
  • Available in 040, 050 and 060 orifice sizes.
  • 4 nozzles included in each kit
  • Other connection sizes available upon request.

The High Pressure Drain Cleaning Nozzle Kits include:

  • Thruster - provides maximum pulling power with a forward jet to bore through plugged lines.
  • Monster Mole - general purpose dual angle nozzle combining both thrust and flush forces for superior pulling and cleaning.
  • Flusher - 45° flushing angle for good pulling power. Good general purpose cleaning nozzle
  • De-Icer / Degreaser - 25° thrusting angle with 3 forward jets for lossening hard grease and ice. Good for use in forward.
Product No.  Orifice Size  Description
 JTNK4P1/404  04  1/4″ 4-pack Jetting Nozzle Kit
 JTNK4P1/405  05  1/4″ 4-pack Jetting Nozzle Kit
 JTNK4P1/406  06  1/4″ 4-pack Jetting Nozzle Kit

 

More Details
Button Nose
Button Nose "BN" Drain Cleaning Nozzles 10 000 psi

Button Nose "BN" Drain Cleaning Nozzles 10 000 psi

The Button Nose "BN" Drain Cleaning Nozzles 10 000 psi is well suited for general cleaning applications. Its short body and smooth round nose make it ideal for tight turns in P-Traps and elbows.

Button Nose "BN" Drain Cleaning Nozzles 10 000 psi feature:

  • 10 000 psi Max. Pressure
  • Heat treated 416SS construction
  • Available in 1/8", 1/4", 3/8", 1/2". 1" NPT connection
  • Quality nozzles for use in sewer and drain cleaning applications
  • Configurations : Thruster mole (TM), Penetrator mole (PM), Flusher mole (FM)
  • Sweeper mole (SM). Corner mole (CM), Monster mole (MM), Degreaser / De-icer (DD)
  • Contact us for more details on these configurations
Product No.  Description
 BN1/8  1/8″ NPT
 BN1/4  1/4″ NPT
 BN3/8  3/8″ NPT
 BN1/2  1/2″ NPT
 BN1  1″ NPT

 



More Details
JT - Non-Rotating Sewer Jetting Nozzles 4 200 psi
JT - Non-Rotating Sewer Jetting Nozzles 4 200 psi

Non-Rotating Sewer Jetting Nozzles 4 200 psi feature:

  • 4 200 psi Max. Pressure
  • Available in 1/4" NPT-F or  3/8" NPT-F Inlet connection
  • Orifice size is engraved on the nozzle
  • Corrosion resistant stainless steel
  • Physically small for cornering ability
 Product No.  Thread NPT-F  OD  Orifice Size*  Jet Position – Forward | Back
 JT1/8*  1/8″  .59  035, 050, 055, 060, 065, 075, 10, 12  1 – 3
 JT1/8NF*  1/4″  .75 035, 040, 045, 060, 090  0 – 3
 JT1/4*  1/4″  .75 040, 045, 055, 080, 090, 10, 12  1 – 3
 JT1/4*  1/4″  .75  060, 075, 11  1 – 4
 JT1/4*  1/4″  .75  11  1 – 5
 JT1/4NF*  1/4″  .75  035, 040, 045, 050, 055, 060, 090, 12  0 – 3
 JT3/8*  3/8″  .92  055, 085  1 – 3
 JT3/8*  3/8″  .92  040, 12, 14, 15, 20  1 – 4
 JT3/8*  3/8″  .92  070  0 – 4

 

More Details
Jet Nose
Jet Nose "JN" Drain Cleaning Nozzles 10 000 psi

Jet Nose "JN" Drain Cleaning Nozzles 10 000 psi

The Jet Nose "JN" Drain Cleaning Nozzles 10 000 psi is standard in the industrial tube and pipe cleaning industry. Its longer length and 45° angle nose acts as a piercing rod in sewer and drain cleaning applications. It is excellent for penetrating heavy grease, soap, or even ice filled lines.

Jet Nose "JN" Drain Cleaning Nozzles 10 000 psi feature :

  • Quality nozzles for use in sewer and drain cleaning applications
  • 10 000 psi Rated Pressure
  • Heat treated 416SS construction Stainless Steel
  • Available in 1/8" NPT, 1/4" NPT, 3/8" NPT, 1/2" NPT connection
  • Configurations : RAM (RM or Offset OS), Flusher mole (FM)
  • Sweeper mole (SM). Degreaser/De-icer (DD)
  • Contact us for more details on these configurations
Product No.  Description
 JN1/8  1/8″ NPT-F
 JN1/4  1/4″ NPT-F
 JN3/8  3/8″ NPT-F
 JN1/2  1/2″ NPT-F

 



More Details
PA AR80 Self-Propelled Tank Cleaner
PA AR80 Self-Propelled Tank Cleaner

The PA AR80 Self-Propelled Tank Cleaner is custom built to ensure performance satisfaction. PA offers a wide variety of quality tank washing nozzles suitable for a wide range of applications.

The PA AR80 Self-Propelled Tank Cleaner features:

  • 2 000 psi Max. Pressure
  • 195° F Max. Temperature
  • 3/4" BSP-F Inlet
  • Nozzle Type: 4" x 1/4" NPT *
  • 303 Stainless Steel Construction
  • 20 Min. - 1 Max. rpm
  • 6.4" (165 mm) Minimum Overall Coverage
Product No.  Description
 25482020P  6.6 gpm Maximum
 25482025P  8.0 gpm Maximum
 25482030P  10.5 gpm Maximum
 25482040P  13.2 gpm Maximum
 25482050P  17.2 gpm Maximum
 25482060P  21.0 gpm Maximum
 25482070P  26.5 gpm Maximum
 25482080P  29.0 gpm Maximum
 25482090P  31.7 gpm Maximum
 25482200P  Protection cage for A80R (fixing screws & nuts included)

 

More Details
PA UR3 Rotating Nozzle
PA UR3 Rotating Nozzle

PA UR3 Rotating Nozzle

The PA UR3 Rotating Nozzle features: 
  • 7 250 psi Max. Pressure
  • 8.0 gpm Max. Flow
  • 175° F Max. Temperature
  • Anti-wear SS pin with Brass Body and Shock Proof Plastic Protection
  • 1 or 2 Nozzle Design
  • 1/2″ BSP-F
  • 1/2″ BSP-F

 Product No.  Description
 UR3035  Rotating Nozzle 1 Nozzle Design 035 Orifice
 UR3045  Rotating Nozzle 1 Nozzle Design 045 Orifice
 UR3055  Rotating Nozzle 1 Nozzle Design 055 Orifice
 UR3060  Rotating Nozzle 1 Nozzle Design 060 Orifice
 UR3050-2  Rotating Nozzle 2 Nozzle Design 050 Orifice
 UR3060-2  Rotating Nozzle 2 Nozzle Design 060 Orifice
 UR3070-2  Rotating Nozzle 2 Nozzle Design 070 Orifice
 UR3080-2  Rotating Nozzle 2 Nozzle Design 080 Orifice
 UR3010-2  Rotating Nozzle 2 Nozzle Design 010 Orifice
 UR3012-2  Rotating Nozzle 2 Nozzle Design 012 Orifice
More Details
JTI - Non-Rotating Sewer Jetting Nozzles with Insert - 7 250 PSI
JTI - Non-Rotating Sewer Jetting Nozzles with Insert - 7 250 PSI

Features:

  • 7 250 psi Max. Pressure
Product No.  Thread NPT-F  OD  Orifice Size*  Jet Position – Forward | Back
 JTI1/4*  1/4″  .98″  060, 080, 12, 15, 20  1 – 6
 JTI1/4NF*  1/4″  .98″  060, 080, 12, 15, 20  0 – 6
 JTI3/8*  3/8″  1.18″  060, 080, 12, 15, 20  1 – 4
 JTI3/8NF*  3/8″  1.18″  060, 080, 12, 15, 20  0 – 4
 JTI3/8C*  3/8″  .98″  060, 080, 12, 15, 20  1 – 6
 JTI3/8CNF*  3/8″  .98″  060, 080, 12, 15, 20  0 – 6
 JTI1/2*  1/2″  1.18″  060, 080, 12, 15, 20  1 – 6
 JTI1/2NF*  1/2″  1.18″  060, 080, 12, 15, 20  0 – 6
 JTI3/4*  3/4″  2.76″  40  1 – 6
 JTI3/4NF*  4/4″  2.76″  40  0 – 6
 JTI1*  1″  2.95″  75  1 – 6
 JTI1NF*  1″  2.95″  75  0 – 6

 

More Details
Dynablast X2 Hydro Excavating Nozzle
Dynablast X2 Hydro Excavating Nozzle

Features:

  • 1,000 PSI Min. Inlet Pressure
  • 3,000 PSI Max Inlet Pressure
  • 82°C / 180°F Max. Temperature
  • Tungsten Carbide Nozze & Seat
  • 303 Stainless Steel Nozzle Body
  • High Density Polywthylene ATEX Compliant
  • Balanced Nozzle
  • 20° Spray Angle
  • 1/2" NPT-F Inlet
  • Weight: 1.10lb
 Product No.  Repair Kit  Replacement Cover  Nozzle Size  Size - IN  Size - MM  Flow @ 1000PSI  Flow @ 1500PSI  Flow @ 2000PSI  Flow @ 2500PSI  Flow @ 3000PSI
 URHX204  25106424P  URHX2CVR  4  0.050  1.27  2.00GPM  2.45GPM  2.83GPM  3.16GPM  3.46GPM
 URHX206  25106624P  URHX2CVR  6  0.062  1.57  3.00GPM  3.67GPM  4.24GPM  4.74GPM  5.20GPM
 URHX208  25106824P  URHX2CVR  8  0.072  1.83  4.00GPM  4.90GPM  5.66GPM  6.32GPM  6.93GPM
 URHX210  25106024P  URHX2CVR  10  0.080  2.03  5.00GPM  6.12GPM  7.07GPM  7.91GPM  8.66GPM
 URHX212  25106224P  URHX2CVR  12  0.087  2.21  6.00GPM  7.35GPM  8.49GPM  9.49GPM  10.39GPM

 

dynablast.X2.nozzleactiondynablast.X2.RepairKit.en

 

 

 

 

 

 

 
CALL FOR PRICING!
Amir Youwakim: 905 567 6590 ext 261  |  John Thomson: 905 867 4642
 

 

More Details