Filter Further

  • PSI
  • GPM
  • HP
  • Pump
  • Pump Speed
  • Drive
  • Air Mover Size
  • Air Mover Type
  • BAR
  • BTU
  • Cabinet
  • Capacity
  • Volts
  • CFM
  • Components Filter
  • Engine
  • Engine Power
  • Fuel Type
  • Heater Accessories
  • Heater Fuel
  • Heater Module
  • Hose Colour
  • Hose Diameter
  • Hose Length
  • Hose Reel Material
  • Hose Reel Retraction
  • Drive Type
  • KW
  • L/Min
  • Lance Length
  • Lance Material
  • Max. Pressure
  • Max. Temp
  • Mobility
  • Pipe Size
  • Pressure
  • Recirculating Hood
  • Safety Shut Off
  • Size
  • Spray Gun Type
  • Starting
  • Steam/ Non Steam
  • Time Delay Shutdown
  • Trailer
  • Type
    • Chemical Transfer Pumps
    • Submersible Pumps
    • Chemical Transfer Pumps
    • Submersible Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • Full Trash Pumps
    • High-Head Pumps
    • Submersible Pumps
    • Submersible Pumps
    • Submersible Pumps
    • Chemical Transfer Pumps
    • Dewatering Pumps
    • High-Head Pumps
    • Semi-Trash Pumps
    • Full Trash Pumps
    • Dewatering Pumps
    • Semi-Trash Pumps
    • Full Trash Pumps
    • Dewatering Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • AMT Pumps
    • Dewatering Pumps
  • Water Type
Kodiak PWP3P15RT Water Pumps
Kodiak PWP3P15RT Water Pumps

440 GPM, 25 FT Suction Lift, 15 HP Kodiak OHV Engine

  • Powered by Kodiak OHV engine
  • 3" Poly pump
  • Chemical resistant
  • Viton seals
  • Assembled in Canada

Specifications

Max Capacity: 440 GPM
Port Size: 3″ x 3″
Suction Lift: 25 FT
Max Head: 125 FT
Engine: 15 HP Kodiak OHV
Weight: 115 LBS

 

Specialty purpose pumps for liquid chemical transfer applications. No accessories needed :

  • Kodiak PWP2P5GC
  • Kodiak PWP2CH5GX
  • Kodiak PWP2P7RT
  • Kodiak PWP3P13GX
  • Kodiak PWP3P15RT

Kodiak is an established Canadian player that has been supplying professional-grade equipment for 18 years with over 300,000 units active in the field.

All Kodiak transfer pumps are engineered and manufactured to provide the utmost in quality and reliability for professional end-users. Whether to transfer chemicals or spray chemical Kodiak has the pump to get the job done.

 

More Details
Kodiak PSP125SSU Water Pump
Kodiak PSP125SSU Water Pump

Features & Benefits:

  • 1 ¼” Submersible Pump
  • 1/3 hp
  • 304 Stainless steel casing
  • Motor with thermal overload protection
  • Built in auto thermal overload reset
  • Top discharge with garden hose connection
  • Bottom suction (Down to 1/8)
  • 33 ft power cable CSA certified product
Pump Type Dewatering Utility Pump
Discharge Size 1 ¼”
Pump Type Thermal Plastic
Motor/Volt/RPM 1/3HP / 115V / 3450 RPM
Rated Amps 3 amp
Max. Head 27 ft
Max. GPM 28 gpm
Bottom suction 1/8”
Dimensions 10” H x 6” W
Casing 304 Stainless Steel
Weight 11 lbs
Warranty 1 year

 

APPLICATIONS

  • Watering garden
  • Back-up for Basement flooding
  • Emptying pool cover
  • Emptying hot tub

Kodiak is an established Canadian player that has been supplying professional grade equipment for 18 years with over  300,000 units active in the field.

This quality light weight utility pump is ideal for various residential / commercial dewatering applications.

More Details
Kodiak PWP3P13GX Water Pumps
Kodiak PWP3P13GX Water Pumps

440 GPM, 25 FT Suction Lift, 13 HP Honda GX390 Engine

  • Powered by Honda GX engine
  • 3" Poly pump High Flow
  • Cast aluminum pump housing offers protection and portability
  • Assembled in Canada
  • Chemical resistant
  • Viton seals
  • Metal roll cage adds strength and extra protection for extended durability
  • Cast iron volute and cast aluminum impeller for heavy-duty performance

Specifications

Max Capacity: 440 GPM
Port Size: 3″ x 3″
Suction Lift: 25 FT
Max Head: 125 FT
Engine: 13 HP Honda GX390
Weight: 110 LBS

 

Kodiak is an established Canadian player that has been supplying professional-grade equipment for 18 years with over 300,000 units active in the field.

All Kodiak transfer pumps are engineered and manufactured to provide the utmost in quality and reliability for professional end-users. Whether to transfer chemicals or spray chemical Kodiak has the pump to get the job done.

More Details
AMT 3
AMT 3" Engine Driven Portable High Pressure Pumps

The AMT line of Engine Driven High Pressure pumps is designed for lawn sprinkling, agricultural spraying, dewatering, fire fighting, emergency water supply and pressure boosting.

Features & Benefits:

  • Cast Aluminum Construction with Cast Iron Diffusers
  • EPDM/EPR Mechanical Seals
  • Optional Viton® Seal and Elastomers Available
  • 3" Cast Iron Suction & Discharge
  • Male NPT Port Sizes
  • Maximum Flow up to 185 GPM
  • Maximum Head up to 89 PSI
  • Maximum Lift to 26 Ft.
  • One Tool Serviceability
  • Utilized for Fire Protection or Irrigation
  • Discharge Port Rotates in 90° Increments

Engine Options:

  • Honda, Briggs & Stratton Gasoline or Hatz Diesel Engines
  • Optional High Pressure Hose Kit and Wheel Kit Available

Contact us 1-888-881-6667 to see what we can do for you today.

 

More Details
AMT 3
AMT 3" Engine Driven Two Stage High Pressure Fire Pumps

The AMT line of Engine Driven High Pressure pumps is designed for lawn sprinkling, agricultural spraying, dewatering, fire fighting, emergency water supply and pressure boosting.

Features & Benefits:

  • Cast Aluminum Construction with Cast Iron Diffusers
  • High Efficiency Two-Stage Precision
  • Cast Aluminum Impellers
  • 2" NPTM Cast Iron Suction Port
  • Three-Way Cast Iron Discharge Port
  • Viton® Mechanical Seal with Silicon Carbide and Carbon Faces
  • EPDM/EPR O-Rings and Gaskets
  • Maximum Head up to 155 PSI
  • Maximum Flow up to 160 GPM
  • Built-in Flapper/Check
  • Valve Permits Self-priming to 20 Ft.
  • Heavy Duty Steel Roll Frame Included

Engine Options:

  • Honda, Briggs & Stratton Gasoline or Yanmar Diesel
  • Optional Wheel Kit Available

Contact us 1-888-881-6667 to see what we can do for you today.

 

More Details
AMT Engine Driven High Pressure Fire Pumps
AMT Engine Driven High Pressure Fire Pumps

The IPT Engine Driven line of High Pressure/Fire pumps deliver excellent pressure and flow for use in many applications including: fire protection, emergency fire fighting, washdown and AG/Sprinkler.

Features & Benefits:

  • Viton® Mechanical Seal with Silicon Carbide & Carbon Faces
  • 2-1/2" NPT Port Sizes
  • Exhaust Prime or Hand Prime Depending on Model
  • Prime Assist to 19 Ft.
  • Built-in Discharge Check Valve
  • Steel Roll Frame with Battery Tray Included
  • Maximum Head up to 165 PSI/ 380’ TDH
  • Delivers to 270 GPM
  • Optional NPT to Fire Hose Thread
  • 12 Volt DC Electric Start
  • Optional Wheel Kit Available
  • Available with B&S Vanguard, Honda, Gasoline or Yanmar Diesel
  • Discharge Pressure Gauge Included Suction Strainer, Nipples and Heavy Duty
  • Aluminum Construction with Replaceable Hard Coat Anodized Wear Ring
More Details
AMT High Pressure and Trash Pedestal Drive Pumps3
AMT High Pressure and Trash Pedestal Drive Pumps3

Features & Benefits:

Pedestal drive units for flex-coupling to an electric motor are available in general purpose, high pressure and trash versions. All models are standard with threaded impeller.

AMT High Pressure and Trash Pedestal Drive Pumps Features:

  • Aluminum Construction
  • Stainless Steel Internal Screws and Pins for Easy Servicing
  • Large Pump Casing for Faster Priming
  • Built-in EPDM/EPR Check Valve for Fast Priming
  • Horizontal Discharge
  • Threaded Male Connections
  • Stainless Steel Shaft Sleeve
  • Strainer Supplied with Each Pump to Prevent Clogging
  • High Pressure—Type P Only
  • Aluminum Impeller
  • Cast Iron Volute
  • EPDM/EPR Seals and O-Rings
  • Trash - Type S Only
  • Cast Iron Impeller & Volute for Resistance to Wear and Abrasion
  • Silicon/Carbide/Viton® Mechanical Seal and EPDM/EPR O-Rings

 

More Details
AMT 3/4
AMT 3/4" & 1" Self Priming Utility Pumps

Features & Benefits:

Aluminum Construction

  • Viton® Mechanical Seal and O-Ring
  • 1" NPT Suction and Discharge Ports
  • 1/3 HP ODP Motor with 8 Ft. 115 VAC Power Cord
  • Two Garden Hose Adapters and Carry Handle Included
  • Self-Cleaning Impeller
  • Maximum Suction Lift 15 Ft. Without Foot Valve
  • AMT Model 2851-96 is designed for liquid transfer and general dewatering such as: emergency water supply, storm drains, pool/spa tub drainage and select chemical transfer up to 1.6 specific gravity that are compatible with all pump components.

 

Cast Aluminum Construction

  • Buna-N Mechanical Seal and O-Ring
  • 1" NPT Suction and Discharge Ports
  • Two Garden Hose Adapters and Carry Handle Included
  • Maximum Suction Lift 6 Ft.
  • 1/2 HP NEMA 56J Open Drip Proof (ODP) Motor with 8 Ft. 115 VAC Cord
  • AMT Model 4292-96 is designed to be portable and handle many water transfer services including: storm drainage, emergency water supply, wash down and pool/spa tub draining. Selfcleaning, semi-open impeller handles solids up to 1/8" diameter.

Cast Bronze Construction

  • Buna-N Mechanical Seal and O-Ring
  • 3/4? NPT Suction and Discharge Ports
  • 1/8 HP, 12 Volt DC, 3700 RPM Motor
  • Maximum Suction Lift 4 Ft.
  • AMT Model 4850-97 Self-priming Bronze Centrifugal pump is compact and designed for a wide range of dewatering/recirculating applications including: marine, salt water aquaculture and live well tanks. Meets U.S. Coast Guard (USCG) Electrical Standards (Title 33, Chapter 1, Part 183, Subpart 1) for Ignition Protection on Gasoline Powered Vessels.

 

 

More Details
Kodiak PWP4SWT Water Pumps
Kodiak PWP4SWT Water Pumps

528 GPM, 26 FT Suction Lift, 11 HP Honda GX340 Engine

Powered by Honda GX engines with Oil Alert for extra reliability. Super tough design, handles slurry & solids up to 1" in diameter. Heavy-duty silicon carbide mechanical seal for longer lasting performance. Cast iron volute and impeller for heavy duty performance. Removable front cover for easy cleaning and on site maintenance. Made in Japan.

Specifications

Max Capacity: 528 GPM
Port Size: 4" x 4"
Suction Lift: 26 FT
Max Head: 79 FT
Engine: 11 HP Honda GX340 OHV
Weight: 147 LBS
Kodiak is an established Canadian player that has been supplying professional grade equipment for 18 years with over 300,000 units active in the field. All Kodiak transfer pumps are engineered and manufactured to provide the utmost in quality and reliability for professional end-users. Whether to empty a ditch during construction or removing slurry around the farm Kodiak has the pump to get the job done.
More Details
Kodiak PWP15SCH4070 Water Pumps
Kodiak PWP15SCH4070 Water Pumps

103 GPM, 26 FT Suction Lift, 5.5 HP Honda GX160 Engine

  • 5.5 hp Honda GX160 OHV engine
  • Cast aluminum pump housing offers protection & portability
  • Mechanical (Carbon Ceramic) seal
  • Made in Japan
  • Metal roll cage adds strength and extra protection for extended - durability
  • Cast iron volute and cast aluminum impeller for heavy-duty performance

Standard Accessories Kit included

  • strainer
  • hose couplings
  • hose bands
  • seals

Specifications

Max Capacity: 103 GPM
Port Size: 1.5″ x 1.5″
Suction Lift: 26 FT
Max Head: 233 FT
Engine: 5.5 HP Honda GX160 OHV
Weight: 59 LBS

Kodiak is an established Canadian player that has been supplying professional-grade equipment for 18 years with over 300,000 units active in the field.

Ideal for fire prevention, irrigation, or transferring water to higher elevations, Kodiak has the pump to get the job done.

More Details
Kodiak PSP200SSK Submersible Pump
Kodiak PSP200SSK Submersible Pump

Features & Benefits:

  • 2" Submersible Pump
  • 1/2 hp
  • 304 Stainless steel casing
  • Motor with thermal overload protection
  • Built in auto thermal overload reset
  • Top discharge
  • Side suction
  • 33 ft power cable
  • CSA certified product

Specifications:

Discharge Size: 2"
Motor / Volt / RPM: 1/2 HP / 115 V / 3450 RPM
Rated Amps: 7.6 A
Maximum Head: 35 FT
Maximum GPM: 66 GPM
Mechanical Seal: Silicon Carbide
Impeller: Cast Iron / Multi Vane
Dimensions (H x W): 14.6" x 6.5"
Weight: 33 LBS

Applications:

  • Dewatering job-site
  • Emptying hot tub
  • Emptying swimming pool
  • Basement flooding

Kodiak is an established Canadian player that has been supplying professional grade equipment for 18 years with over  300,000 units active in the field.

This quality commercial grade submersible pump is ideal for various applications.

More Details
Kodiak PSP125ABK Water Pump
Kodiak PSP125ABK Water Pump

The PSP125ABK is ideal for many applications such as light dewatering, pool covers, sump pump applications, and can be used in salt water. It offers features that are normally on larger, more expensive pumps. The motor is protected by a heavy duty mechanical seal made of silicon carbide and a lip seal made of oil resistant Buna. The rotor shaft, motor housing and all hardware are made of 304 stainless steel. All other “wet parts” are made of reinforced plastic. A thermal breaker ensures shut-down should overheating occur.

Features & Benefits:

• 1/3 HP
• ABS Casing
• Side suction
• 304 Stainless steel motor casing, rotor shaft
• Motor with thermal overload protection
• Built in auto thermal overload reset
• Top discharge with garden hose connection
• 33 ft power cable
• CSA certified product

Specifications

Discharge Size: 1"
Pump Type: Thermal Plastic
Motor / Volt / RPM: 1/3 HP / 115 V / 3450 RPM
Rated Amps: 2 A
Maximum Head: 19.6 FT
Maximum GPM: 21 GPM
Dimensions (H x W) 11" x 5"
Mechanical Seal: Silicon Carbide
Lip Seal & O Rings: Buna-N
Weight: 9 LBS

 

Applications:

  • Watering garden
  • Back-up for Basement flooding
  • Emptying pool cover
  • Emptying
More Details
Kodiak PWP2CH5GX Water Pumps
Kodiak PWP2CH5GX Water Pumps

150 GPM, 25 FT Suction Lift, 5.5 HP Honda GX160 Engine

  • Powered by Honda GX engine
  • 2" Poly pump
  • Chemical resistant
  • Viton seals
  • Lightweight, wrap-around frame
  • Mechanical (Carbon Ceramic) seal
  • Polypropylene impeller and volute
  • Assembled in Canada
  • EDPM seals and pump housing are resistant to corrosive chemicals

Specifications

Max Capacity: 150 GPM
Port Size: 2″ x 2″
Suction Lift: 25 FT
Max Head: 134 FT
Engine: 5.5 HP Honda GX160
Weight: 49 LBS

 

Kodiak is an established Canadian player that has been supplying professional grade equipment for 18 years with over 300,000 units active in the field.

All Kodiak transfer pumps are engineered and manufactured to provide the utmost in quality and reliability for professional end-users. Whether to transfer chemical or spray chemical Kodiak has the pump to get the job done.

 

More Details
Kodiak PWP2HX Water Pumps
Kodiak PWP2HX Water Pumps

137 GPM, 26 FT Suction Lift, 4 HP Honda GX120 Engine

  • Powered by Honda GX engines with Oil Alert for extra reliability
  • Cast iron impeller and volute
  • Cast-aluminum pump housing offers protection & portability
  • Handles solids up to ¼" (7mm) in diameter
  • Carbon ceramic mechanical seal
  • Cast iron impeller and volute
  • Protective metal roll cage give added strength for everyday jobsite use

Specifications

Max Capacity: 137 GPM
Port Size: 2″ x 2″
Suction Lift: 26 FT
Max Head: 106 FT
Engine: 4.0 HP Honda GX120 OHV
Weight: 52 LBS

 

Kodiak is an established Canadian player that has been supplying Professional grade equipment for 18 years with over 300,000 units active in the field.

All Kodiak transfer pumps are engineered and manufactured to provide the utmost in quality and reliability for professional end-users. Whether to irrigate a field, resurface an ice rink, empty a pool or quickly empty a flooded basement Kodiak has the pump to get the job done.

 

More Details
Kodiak PWP2SCH5050 Water Pump
Kodiak PWP2SCH5050 Water Pump

106 GPM, 26 FT Suction Lift, 5.5 HP Honda GX160 Engine

  • Special high pressure design lets you blast through jobs faster and more thoroughly
  • Oil Alert feature shuts down engine if oil drops below a safe operating level
  • Metal roll cage adds strength and extra protection for extended durability
  • Cast iron volute and impeller for heavy duty performance
  • Made in Japan

Specifications

Max Capacity: 106 GPM
Port Size: 2″ x 2″
Suction Lift: 26 FT
Max Head: 167 FT
Engine: 5.5 HP Honda GX160 OHV
Weight: 59 LBS

 

All Kodiak transfer pumps are engineered and manufactured to provide the utmost in quality and reliability for professional end-users.

The Kodiak PWP2SCH5050 High Pressure Pump is ideal for irrigation, fire fighting, or any applications where higher discharge heights are necessary. Fire Kit available separately. Overall Kodiak has the pump to get the job done.

 

More Details
Kodiak PWP2SST Water Pumps
Kodiak PWP2SST Water Pumps

185 GPM, 26 FT Suction Lift, 4 HP Honda GX120 Engine

  • Powered by Honda GX engines with Oil Alert for extra reliability
  • Made in Japan
  • Super tough design, handles slurry & solids up to ¾" in diameter
  • Cast iron volute and impeller for heavy duty performance
  • Heavy-duty silicon carbide mechanical seal for longer lasting performance

Specifications

Max Capacity: 185 GPM
Port Size: 2″ x 2″
Suction Lift: 26 FT
Max Head: 76 FT
Engine: 4.0 HP Honda GX120 OHV
Weight: 46 LBS

Kodiak is an established Canadian player that has been supplying professional grade equipment for 18 years with over 300,000 units active in the field.

All Kodiak transfer pumps are engineered and manufactured to provide the utmost in quality and reliability for professional end-users. Whether to irrigate a field, resurface an ice rink, empty a pool or quickly empty a flooded basement Kodiak has the pump to get the job done.

 

More Details
Kodiak PWP2SWT Water Pumps
Kodiak PWP2SWT Water Pumps

158 GPM, 26 FT Suction Lift, 5.5 HP Honda GX160 Engine

  • Powered by Honda GX engines with Oil Alert for extra reliability
  • Super tough design, handles slurry & solids up to 1" in diameter
  • Heavy-duty silicon carbide mechanical seal for longer lasting performance
  • Cast iron volute and impeller for heavy duty performance
  • Removable front cover for easy cleaning and on site maintenance
  • Made in Japan

Specifications

Max Capacity: 158 GPM
Port Size: 2" x 2"
Suction Lift: 26 FT
Max Head: 85 FT
Engine:  5.5 HP Honda GX160 OHV
Weight: 74 LBS

 

Kodiak is an established Canadian player that has been supplying professional grade equipment for 18 years with over 300,000 units active in the field.

All Kodiak transfer pumps are engineered and manufactured to provide the utmost in quality and reliability for professional end-users. Whether to empty a ditch during construction or removing slurry around the farm Kodiak has the pump to get the job done

More Details
Kodiak PWP3HX Water Pumps
Kodiak PWP3HX Water Pumps

264 GPM, 26 FT Suction Lift, 5.5 HP Honda GX160 OHV

  • Powered by Honda GX engines with Oil Alert for extra reliability
  • Cast iron impeller and volute
  • Cast-aluminum pump housing offers protection & portability
  • Handles solids up to ¼" (7mm) in diameter
  • Carbon ceramic mechanical seal
  • Cast iron impeller and volute
  • Protective metal roll cage give added strength for everyday jobsite use

Specifications

Max Capacity: 264 GPM
Port Size: 3" x 3"
Suction Lift: 26 FT
Max Head: 106 FT
Engine: 5.5 HP Honda GX160 OHV
Weight: 66 LBS

 

Kodiak is an established Canadian player that has been supplying professional grade equipment for 18 years with over
300,000 units active in the field.

All Kodiak transfer pumps are engineered and manufactured to provide the utmost in quality and reliability for professional end-users. Whether to irrigate a field, resurface an ice rink, empty a pool or quickly empty a flooded basement Kodiak has the pump to get the job done.

More Details
Kodiak PWP3SST Water Pumps
Kodiak PWP3SST Water Pumps

264 GPM, 26 FT Suction Lift, 5.5 HP Honda GX160 Engine

  • Powered by Honda GX engines with Oil Alert for extra reliability
  • Made in Japan
  • Super tough design, handles slurry & solids up to ¾" in diameter
  • Heavy-duty silicon carbide mechanical seal for longer lasting performance
  • Cast iron volute and impeller for heavy duty performance

Specifications

Max Capacity: 264 GPM
Port Size: 3" x 3"
Suction Lift: 26 FT
Max Head: 76 FT
Engine: 5.5 HP Honda GX160 OHV
Weight: 57 LBS

 

Kodiak is an established Canadian player that has been supplying professional grade equipment for 18 years with over 300,000 units active in the field.

All Kodiak transfer pumps are engineered and manufactured to provide the utmost in quality and reliability for professional end-users. Whether to empty a ditch during construction or removing slurry around the farm Kodiak has the pump to get the job done.

More Details
Kodiak PWP3SWT Water Pumps
Kodiak PWP3SWT Water Pumps

343 GPM, 26 FT Suction Lift, 8 HP Honda GX240 Engine

  • Powered by Honda GX engines with Oil Alert for extra reliability
  • Super tough design, handles slurry & solids up to 1" in diameter
  • Heavy-duty silicon carbide mechanical seal for longer lasting performance
  • Cast iron volute and impeller for heavy duty performance
  • Removable front cover for easy cleaning and on site maintenance
  • Made in Japan

Specifications

Max Capacity: 343 GPM
Port Size: 3" x 3"
Suction Lift: 26 FT
Max Head: 92 FT
Engine: 8 HP Honda GX240 OHV
Weight: 132 LBS

 

Kodiak is an established Canadian player that has been supplying professional grade equipment for 18 years with over 300,000 units active in the field.

All Kodiak transfer pumps are engineered and manufactured to provide the utmost in quality and reliability for professional end-users. Whether to empty a ditch during construction or removing slurry around the farm Kodiak has the pump to get the job done.

More Details
Kodiak PWP4HX Water Pumps
Kodiak PWP4HX Water Pumps

476 GPM, 26 FT Suction Lift, 8.0 HP Honda GX240 OHV

  • Powered by Honda GX engines with Oil Alert for extra reliability
  • Cast iron impeller and volute
  • Cast-aluminum pump housing offers protection & portability
  • Handles solids up to ¼" (7mm) in diameter
  • Carbon ceramic mechanical seal
  • Cast iron impeller and volute
  • Protective metal roll cage give added strength for everyday jobsite use
  • Made In Japan

Specifications

Max Capacity: 476 GPM
Port Size: 4" x 4"
Suction Lift: 26 FT
Max Head: 93 FT
Engine: 8.0 HP Honda GX240 OHV
Weight: 110 LBS

 

Kodiak is an established Canadian player that has been supplying professional grade equipment for 18 years with over 300,000 units active in the field.

All Kodiak transfer pumps are engineered and manufactured to provide the utmost in quality and reliability for professional end-users. Whether to irrigate a field, resurface an ice rink, empty a pool or quickly empty a flooded basement Kodiak has the pump to get the job done.

More Details
AMT Rotary Drum Pumps
AMT Rotary Drum Pumps

Features & Benefits:

 

Model 5271-98 Features:

  • 304 Stainless Steel Construction with Teflon® Seals and Carbon Vanes
  • Special Order 316 Stainless Steel Model Available (5270-98)


Models 4821-95 and 5541-95 Features:

  • Cast Iron Construction with Buna-N Seals and Carbon Vanes
  • High Flow Model 5541-95 Delivers 8 GPM
  • Model 4821-95 Delivers 5 GPM

Model 4942-99 Features:

  • Ryton® Construction with Teflon® Seals and Ryton® Vanes

Model 4946-99 Features:

  • Polypropylene Construction with Teflon® Seals and Ryton® Vanes

Model 5150-96 Features:

  • Aluminum Lobe Pump with Machined Steel Lobes and Buna-N Seals

All Models are Self-Priming and Include Suction and Disch

More Details